411 P Series
41110P & 41130P
Extended Life Particulate (For Dispenser Use)
Extended Life Particulate (For Dispenser Use)
Benefits
- PetroClear® models 41110P and 41130P are particulate removing spin-on filters designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils.
- PetroClear® models 41110P and 41130P are particulate spin-on filters. These filters are designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR DETECT PHASE SEPARATION IN ETHANOL BLENDED GASOLINES TO SLOW FLOW.
- PetroClear® model 41110P filter offers efficient 10 micron (nominal) particulate removal.
- PetroClear® model 41130P filter offers efficient 30 micron (nominal) particulate removal.
- Textured paint coating helps ensure a simple, mess-free installation and removal process.
- UL® recognized
- Compatible with neat gasoline, Diesels, Biodiesel and Ethanol blended fuels.
Specifications
- The PetroClear® model 41110P utilizes a 10 micron (nominal) cellulose media to remove particulate from gasoline and diesel fuels including Ethanol blended gasoline, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes particulate 10 microns (nominal) or larger.
- The PetroClear® model 41130P utilizes a 30 micron (nominal) cellulose media to remove particulate from gasoline and diesel fuels including Ethanol blended gasoline, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes particulate 30 microns (nominal) or larger.
- The maximum flow rate for PetroClear® models 41110P and 41130P is 25 gpm (94.6 lpm). Maximum operating pressure is 50 psid (3.4 bar). Collapse pressure is 150 psid (10.3 bar). Maximum operating temperature is 250°F (139°C).
- PetroClear® models 41110P and 41130P utilize a standard 1" – 12 UNF mounting thread ref. (3/4" flow) required for most spin-on filter Adapters used in Gilbarco, Wayne, Bennett, Tokheim and other major manufacturers’ dispensers, as well as with Adapters used in the aftermarket.
- Adapters are available for models 41110P and 41130P in aluminum and cast iron. Single Adapters are available in both 3/4" and 1" NPT and BSP inlet/outlet threads.
Specifications Chart
| Model | 41110P | 41130P |
|---|---|---|
| Filter Type | Spin-On | Spin-On |
| Media Type | *Cellulose | *Cellulose |
| Micron Rating | 10 Micron (nominal) | 30 Micron (nominal) |
| Diameter | 3.70" | 3.70 |
| Height | 10.48" | 10.48" |
| Mounting Thread | 1" – 12UNF | 1" – 12UNF |
| Flow Rate | 25 gpm (94.6 lpm) | 25 gpm (94.6 lpm) |
| Flow | 3/4" flow | 3/4" flow |
| Shell Thickness | 0.020 | 0.020 |
| Gasket Material | Buna N | Buna N |
| Collapse (Min.) | 150 psid (10.3 bar) | 150 psid (10.3 bar) |
| Burst (Min.) | 250 psi (17.2 bar) | 250 psi (17.2 bar) |
| Max. Operating Temp. | 250°F (139°C) | 250°F (139°C) |
*Particulate Removing
Dimensions/Flow Rate
Adapters
| Catalog | Description |
|---|---|
| .75 N1-12 | 3/4" NPT Inlet/Outlet Ports, 1" – 12 UNF (cast iron) |
| .75 N1-12A | 3/4" NPT Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
| 1.0 N1-12 | 1" NPT Inlet/Outlet Ports, 1" – 12 UNF (cast iron) |
| 1.0 N1-12A | 1" NPT Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
| .75 B1-12 | 3/4" BSP Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
| 1.0 B1-12 | 1" BSP Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc.