409 P Series
40910P & 40930P
Extended Life Particulate (For Dispenser Use)
Extended Life Particulate (For Dispenser Use)
Benefits
- PetroClear® models 40910P and 40930P are particulate removing spin-on filters designed to remove particulate from neat gasoline, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils.
- PetroClear® models 40910P and 40930P are particulate spin-on filters. These filters are designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR DETECT PHASE SEPARATION IN ETHANOL BLENDED GASOLINES TO SLOW FLOW.
- PetroClear® model 40910P filter offers efficient 10 micron (nominal) particulate removal.
- PetroClear® model 40930P filter offers efficient 30 micron (nominal) particulate removal.
- Textured paint coating helps ensure a simple, mess-free installation and removal process.
- UL® recognized
- Compatible with neat gasoline, Diesels, Biodiesel and Ethanol blended fuels.
Specifications
- The PetroClear® model 40910P utilizes a 10 micron (nominal) cellulose media to remove particulate from gasoline and diesel fuels including all Ethanol blended gasoline, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes particulate 10 microns (nominal) or larger.
- The PetroClear® model 40930P utilizes a 30 micron (nominal) cellulose media to remove particulate from gasoline and diesel fuels including all Ethanol blended gasoline, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes particulate 30 microns (nominal) or larger.
- The maximum flow rate for PetroClear® models 40910P and 40930P is 25 gpm (94.6 lpm). Maximum operating pressure is 50 psid (3.4 bar). Collapse pressure is 150 psid (10.3 bar). Maximum operating temperature is 250°F (139°C).
- PetroClear® models 40910P and 40930P utilize a standard 1" – 12 UNF mounting thread ref. (3/4" flow) required for most spin-on filter adapters used in Gilbarco, Wayne, Bennet, Tokheim and other major manufacturers’ dispensers, as well as with adapters used in the aftermarket.
- Adapters are available for models 40910P and 40930P in aluminum and cast iron. Single adapters are available in both 3/4" and 1" NPT and BSP inlet/outlet threads.
Specifications Chart
| Model | 40910P | 40930P |
|---|---|---|
| Filter Type | Spin-On | Spin-On |
| Media Type | *Cellulose | *Cellulose |
| Micron Rating | 10 Micron (nominal) | 30 Micron (nominal) |
| Diameter | 3.70" | 3.70 |
| Height | 8.60" | 8.60" |
| Mounting Thread | 1" – 12UNF | 1" – 12UNF |
| Flow Rate | 25 gpm (94.6 lpm) | 25 gpm (94.6 lpm) |
| Flow | 3/4" flow | 3/4" flow |
| Shell Thickness | 0.020 | 0.020 |
| Gasket Material | Buna N | Buna N |
| Collapse (Min.) | 150 psid (10.3 bar) | 150 psid (10.3 bar) |
| Burst (Min.) | 250 psi (17.2 bar) | 250 psi (17.2 bar) |
| Max. Operating Temp. | 250°F (139°C) | 250°F (139°C) |
*Silicone Treated & Particulate Removing
Dimensions/Flow Rate
Adapters
| Catalog | Description |
|---|---|
| 0.75 N1-12 | 3/4" NPT Inlet/Outlet Ports, 1" – 12 UNF (cast iron) |
| 0.75 N1-12A | 3/4" NPT Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
| 1.00 N1-12 | 1" NPT Inlet/Outlet Ports, 1" – 12 UNF (cast iron) |
| 1.00 N1-12A | 1" NPT Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
| 0.75 B1-12 | 3/4" BSP Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
| 1.00 B1-12 | 1" BSP Inlet/Outlet Ports, 1" – 12 UNF (aluminum) |
If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc.