40910WA and 40930WA
EXTENDED LIFE AGRICULTURAL WATER SENSING AND PARTICULATE REMOVING IN NEAT GASOLINE AND DIESELS

Benefits

  • PetroClear® models 40910WA and 40930WA are particulate removing and water sensing spin-on filters designed to remove particulate and to sense both free and emulsified water from neat gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils.
  • PetroClear® models 40910WA and 40930WA are particulate and water sensing spin-on filters. These filters are designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in neat gasoline and diesel fuels. This filter will not sense nor react to water in Ethanol blended gasoline. (Reaction known as phase separation)
  • PetroClear® model 40910WA filter offers efficient 10 micron (nominal) particulate removal and senses both free and emulsified water.
  • PetroClear® model 40930WA filter offers efficient 30 micron (nominal) particulate removal and senses both free and emulsified water in neat gasoline.
  • Will not detect phase separation in Ethanol blended fuels.
  • Compatible with Biodiesel, Kerosene, Fuel Oil, ULSD (Ultra Low Sulfur Diesel), and Diesel fuels.
  • Textured paint coating helps ensure a simple, mess-free installation and removal process.

Specifications

  • The PetroClear® model 40910WA utilizes a 10 micron (nominal) cellulose media to remove particulate from gasolines and diesel fuels including Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes particulate 10 microns (nominal) or larger, and utilizes a super absorbent media that is laminated to the filter media for water sensing capabilities in neat gasoline and diesel fuel.
  • The PetroClear® model 40930WA utilizes a 30 micron (nominal) cellulose media to remove particulate from gasolines and diesel fuels including Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes particulate 30 microns (nominal) or larger, and utilizes a super absorbent media that is laminated to the filter media for water sensing capabilities in neat gasoline and diesel fuel.
  • Once PetroClear® models 40910WA and 40930WA have absorbed 10.7 ounces (315 mil) of water from neat gasoline or diesel fuel, flow will be noticeably slow.
  • The maximum flow rate for PetroClear® models 40910WA and 40930WA is 25 gpm (94.6 lpm). Maximum operating pressure is 50 psid (3.4 bar). Collapse pressure is 150 psid (10.3 bar). Maximum operating temperature is 250°F (139°C).
  • PetroClear® models 40910WA and 40930WA utilize a standard 1.375"-12 UNF mounting thread ref. (1" flow) required for most spin-on filter adapters used in aftermarket and agricultural applications.
  • PetroClear® models 40910WA and 40930WA utilize an epoxy coated interior shell to eliminate oxidation (rusting), which can cause pinhole leaks from the inside of the filter shell.
  • Adapters are available for models 40910WA and 40930WA in cast iron. These single adapters are available in 1" NPT inlet/outlet thread.

Specifications Chart

Model 40910WA 40930WA
Filter Type Spin-On Spin-On
Media Type *Cellulose with Super Absorbent Media *Cellulose with Super Absorbent Media
Micron Rating 10 Micron (nominal) 30 Micron (nominal)
Diameter 3.70" 3.70"
Height 8.60" 8.60"
Mounting Thread 1.375" – 12 UNF 1.375" – 12 UNF
Flow Rate 25 gpm (94.6 lpm) 25 gpm (94.6 lpm)
Flow 1" flow 1" flow
Shell Thickness 0.020 0.020
Gasket Material Buna N Buna N
Collapse (Min.) 150 psid (10.3 bar) 150 psid (10.3 bar)
Burst (Min.) 250 psi (17.2 bar) 250 psi (17.2 bar)
Max. Operating Temp. 250°F (139°C) 250°F (139°C)

*Water Sensing and Particulate Removing

Dimensions/Flow Rate

40910W-AD and 40930W-AD Diagram
40910W-AD and 40930W-AD-Chart

Adapters

Catalog Description
1.00N1.375-12 1"NPTInlet/OutletPorts,1.375"–12UNF(castiron)

If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc.


Petroclear Filters Are Not To Be Used In Aviation Fuel Applications.