PCP-E10 Series
PCP-E10 and PCP-E30
Replacement Element
Replacement Element
Benefits
- PetroClear® models PCP-E10 and PCP-E30 are particulate removing and water sensing replacement element type filters designed for aftermarket, cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial applications.
- PetroClear® models PCP-E10 and PCP-E30 are particulate removing replacement element type filters designed to remove particulate from neat gasoline, Ethanol blended gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils, lube oils and synthetic fluids.
- PetroClear® models PCP-E10 and PCP-E30 are particulate replacement element type filters. These filters are designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR DETECT PHASE SEPARATION IN ETHANOL BLENDED GASOLINE.
- PetroClear® model PCP-E10 filter offers efficient 10 micron (nominal) particulate removal.
- PetroClear® model PCP-E30 filter offers efficient 30 micron (nominal) particulate removal.
Specifications
- PetroClear® model PCP-E10 utilizes a 10 micron (nominal) cellulose media to remove particulate from gasoline and diesel fuels including Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes particulate 10 microns (nominal) or larger.
- PetroClear® model PCP-E30 utilizes a 30 micron (nominal) cellulose media to remove particulate from gasoline and diesel fuels including Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes particulate 30 microns (nominal) or larger.
- The maximum flow rate for PetroClear® models PCP-E10 and PCP-E30 is 30 gpm (114 lpm). Maximum operating pressure is 50 psid (3.4 bar). Collapse pressure is 150 psid (10.3 bar). Maximum operating temperature is 250°F (139°C).
- PetroClear® models PCP-E10 and PCP-E30 replacement elements fit the Cim-Tek® Centurion Series housings and other brands with a 5" x 9" element.
Specifications Chart
| Model | PCP-E10 | PCP-E30 |
|---|---|---|
| Filter Type | Element | Element |
| Media Type | *Cellulose | *Cellulose |
| Micron Rating | 10 Micron (nominal) | 30 Micron (nominal) |
| Diameter | 4.50" | 4.50" |
| Height | 9.25" | 9.25" |
| Flow Rate | 30 gpm (114 lpm) | 30 gpm (114 lpm) |
| Gasket Material | Buna N | Buna N |
| Collapse (Min.) | 150 psid (10.3 bar) | 150 psid (10.3 bar) |
| Max. Operating Temp. | 250°F (139°C) | 250°F (139°C) |
*Particulate Removing
Dimensions/Flow Rate
If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc.